UV-Stable Leak Repair Tape with MicroSealant® Technology
MarMac’s MarMax™ Tape is a proven, industrial-strength, contractor-grade, leak repair tape and one-step permanent repair system for virtually all roof types, roof accessories, and much more. MarMax™ features a UV-stable backing which creates a waterproof, moisture and air-tight barrier with no additional sealing required.
The MicroSealant® technology utilized by MarMax™ is extremely stable and resistant to oxygen, ozone, and heat. MarMax™ is formulated from synthetic polymers and contain a built-in primer that facilitates instant bonding to most known materials used in transportation, roofing, and the traditional building envelope, such as: EPDM rubber, TPO, hypalon, aluminum, galvanized steel, steel, wood, fiberglass, and much more. It will not adhere to silicone. Easy to use, MarMax™ is a permanent fix for leaks and other weather-proofing repairs.
MarMax™ has an extremely wide temperature tolerance, remaining flexible in temperatures as low as -70°F (-57°C), making it virtually impossible to thermally shock the seam causing a leak. MicroSealant® technology makes MarMax™ a self-healing tape and extremely robust to a wide range of surface conditions, resulting in reduced steps during installation.
FEATURES & BENEFITS
- Creates a waterproof, moisture and air tight barrier with no additional sealing required.
- Permanent & remains flexible in extremely cold temperatures
- Easy to install; no special tools, or primers required
- Low cost & readily-available
- Meets or exceeds the material requirements of ASTM D 413, ASTM D 882 and ASTM C 765.
*MarMax™ is not compatible with silicone sealants or lubricants. Avoid using silicone based products near MarMax™.
All typical properties of MarMax Tape are based on, and meet or exceed the material requirements of:
|ASTM D 413||ASTM D 882||ASTM C 765|
Store material in its original container at temperatures between 40-100°F (4-38°C). The shelf life is five (5) years when stored as recommended.
|Service temp range||-40°F||212°F|
|Application temp range||40°F||150°F|
|*It is recommended to use a primer for temperatures below 40°F. Keep tape at room temperature prior to application.|
|180° Peel||5 pli||ASTM D 413|
|Elongation||700%||ASTM D 882|
|Pliability||No cracks in membrane|
|Temp flexibility @ -30°F||Passes 1/2″ radius||ASTM C 765|
The application surface must be clean and dry. Moisture, dust, dirt, oil, grease, salt, or other foreign matter should be removed with a non-residue cleaner such as acetone or lacquer thinner. Avoid using silicone based products near the application area, as MarMax™ will not stick to silicone.
Apply MarMax™ over the repair area, removing the release liner gradually to prevent contamination of the adhesive prior to application. Rub or roll with pressure using your hand or steel roller to activate bonding process.
4″ x 50′ Rolls
6″ x 50′ Rolls
100 ft2 Cases
RV & Mobile Home Roofs
Skylights & Gutters
Box Trucks & Semi Trailers
Barns & Morton Buildings
General Home Repairs