TST 2600

Water & oil stain resistance treatment for garage floors & stone countertops
  • Superior Water & Oil Resistance

  • High Durability With Significant
    Stain Resistance

  • Easily Applied With a Airless Sprayer, Roller, or Brush

  • Prolongs Useful Life of Material

Safeguard against Oil & Water stains for floors & countertops

TST 2600 is a topical surface treatment designed to prevent penetration and staining from water, oils, and multiple other substances. It provides a temporary barrier on various substrates, such as concrete, stone, brick, and granite. TST 2600 is not a permanent coating, but it can be reapplied as it wears off from traffic across the surface to which it is applied.

TST 2600 is specifically designed for use in areas where there is a need for protection from both water and oil-based stains, such as garage floors, shop floors, outdoor kitchens, patios, and a host of other areas.

  • Provides significant stain resistance from water and oils
  • Extends the materialʼs useful lifespan
  • Does not alter physical characteristics or performance of original material
  • Dries at ambient temperatures
  • Does not need to be diluted
  • Environmentally Friendly
    • Water-borne treatment blend
    • Stable with low VOC
TST 2600 is based on fluorochemical chemistry with small molecular size, yielding a very deep penetration of the substrate surface. The unique character of this topical application includes good penetration of the substrate to which it is applied as well as that of cross-linking at ambient temperatures. TST 2600 essentially becomes a part of the cementitious structure, adding much extended durability, performance, and longevity to the infrastructure. As a part of the infrastructure itself once cross-linked, it provides a very comfortable degree of protection against water and oil-based stains such as iodine, olive oil, red wine, ketchup, motor oil (both fresh and dirty), chili oil, coffee, and more.
Appearance Opaque, white, viscous
pH 4.0 – 5.0
Odor Slight
Freezing Point ~ 32°F
Relative Density ~ 1.01 g/cm3
Specific Gravity 1.01
Coverage (one coat) 250 – 300 ft2/gal
CAUTION: Prior to use, please read the Manufacturer Warranty & Disclaimer.

TST 2600 is a premixed, water based, ready for use product to be used as a topical treatment for porous concrete infrastructures. Shake TST 2600 well before using so as to thoroughly mix the ingredients. Do not dilute (it is not needed). TST 2600 should be applied when ambient temperatures are between 41-125°F, and the surface is dry and free of dirt, dust, and debris. Do NOT apply in cold or wet weather.

Apply TST 2600 with a roller, brush, or airless sprayer using an adequate nozzle size (clean sprayer immediately after use with soap and water). It is important that it be applied in light ‘evenʼ coats with just a little overlap. Once the first coat is applied let it just about dry and then another coat may be applied. One gallon covers approximately 250-300 sq ft per coat.


55 Gallon Drums
5 Gallon Pails
*Other sizes available on request


Garage/Shop Floors
Outdoor Kitchens
Granite Countertops







Request TST 2600 Info

We’re here to help! For purchase inquiries, additional information, or other questions regarding our TST 2600, fill out the form below.

Other Products

*All statements and technical information are based on tests and/or data which MarMac Manufacturing deems reliable, however, MarMac does not warrant or guarantee the accuracy or completeness of such information. Please read further manufacturer liability and warranty information.
MarMac AIS Applied Infrastructure Sciences logo

© Copyright MarMac Manufacturing Company, Inc. All rights reserved.