Water penetration protection for wood & cementitious materials
PSC 4400 is a next-generation waterproofing coating for infrastructure materials. It is multiple component coating, designed to block about 99.0% of water entry through materials exposed to extreme water conditions. This ultimately achieves the goal of greatly extending the useful life, as well as the aesthetic of the infrastructure material.
PSC 4400 can be used as a waterproofing medium for basements, underpinnings, crawlspace walls, or any other areas where water is likely to accumulate.
BENEFITS
- Protects substrate from water penetration
- Extends lifespan of infrastructure
- Environmentally Friendly
- Water-borne polymer with innovative core-shell technology
- Low VOC
- Applicator Friendly
- Easy to store and apply by brush, roller, or low-pressure sprayer
- Minimal PPE required
| PROPERTY | VALUE |
|---|---|
| Appearance | Opaque, White, Viscous |
| pH | 10.0 – 11.0 |
| Odor | Slight |
| Freezing Point | ~ 32°F |
| Flammability | Non-flammable |
| Relative Density | ~ 1.089 g/cm3 |
| Solubility in Water | All Components Miscible |
| Decomposition Temp | Will Not Decompose |
| Oxidizing Properties | Will Not Oxidize |
| Specific Gravity | 1.089 |
| Percentage Solids | 46 – 48% |
| Viscosity | 4859 – 7380 cP |
| Dry Film Thickness | 3.5 – 14 mils* |
| Coverage | ~ 200 ft2/gal |
| * Dependent upon the application method, applicator technique, and the concrete surface or other porous substrate.
CAUTION: Prior to use, please read the Manufacturer Warranty & Disclaimer. |
|
PSC 4400 is a premixed, water based, ready for use product to be used as a coating for concrete (porous) infrastructures. Mix PSC 4400 very gently to make sure that the tint (if present) and consistency are uniform. Do not dilute PSC 4400.
Be sure to apply the coating when ambient temperatures and conditions are within the suggested parameters.
The theoretical coverage (for one coat) per gallon of PSC 4400 is determined to be approximately 250 square feet. The theoretical coverage for one coat is approximately 6.10 square meters per liter. This is dependent upon such factors as Wet Film Thickness (WFT), any wastage that might occur, and the applicatorʼs technique and method used and the porous surface to which it is applied.
The PSC 4400 can be applied with a brush, masonry nap roller, and/or a low-pressure sprayer using an adequate nozzle size. If a sprayer is used, do not allow the coating mixture to remain past its pot-life but clean immediately upon completion with copious amounts of soap and water.
AVAILABILITY
5 Gallon Pails
*Other sizes available on request
APPLICATIONS
Basement Foundations
Crawlspaces
Underpinnings
+ More
CONCRETE
BRICK
WOOD
