-
Prevents fungal & microbial colonies on concrete surfaces
-
Permanent & non-diminishable
-
Perfect for sewer/sanitary applications
-
Does not physically alter final product
-
Infrastructure, applicator & environmentally friendly
The most advanced & potent antifungal/antimicrobial product on the market
AMX 5500 is a next-generation dual antimicrobial/antifungal admixture specifically designed to prevent the Microbial Induced Corrosion of Concrete (MICC). AMX 5500 represents a significant advance in the technology used to combat MICC by using three distinct components to aggressively prevent any microbes from establishing a foothold in concrete.
Designed to counteract the effects of MICC in sewer/sanitary applications, AMX 5500 can be added during mixing to any concrete structures where antimicrobial or antifungal properties are desired.
BENEFITS
- Antifungal/antimicrobial does not diminish over time
- Does not alter physical characteristics of the final product
- Environmentally Friendly
- Will not leach out, migrate, or wash away – permanently embedded within the substrate
- Will not impact surrounding soil or environment in which its placed
- Stable and inert
- Applicator Friendly
- Does not need to be diluted
- Replaces equivalent amount of mix water and can be added directly to the mix
- Safe to apply with no additional PPE needed
PROPERTY | VALUE |
---|---|
Appearance | Clear, colorless |
pH | 5.5 – 6.5 |
Odor | Very slight |
Freezing Point | ~ 32°F |
Flammability | Non-flammable |
Relative Density | ~ 0.978 – 0.990 g/cm3 |
Specific Gravity | 0.978 – 0.990 |
Percentage Solids | 50 – 53% |
Viscosity | 1020 – 1400 cP |
Adhesion | 466psi (lab conditions)* |
CAUTION: Prior to use, please read the Manufacturer Warranty & Disclaimer. |
Stir and/or agitate AMX 5500 thoroughly before use. Diluting AMX 5500 is not needed. The total volume of AMX 5500 used in a particular application is to be considered “mix water” and must be taken into account when calculating the total water to concrete ratio.
Approximately 122-128 fl oz is enough AMX 5500 to adequately treat 1 yd3 of concrete in most applications. For applications where a more robust ‘protectionʼ is needed, the mixtured could be increased up to 192 fl oz for 1 yd3.
Add the required quantity of AMX 5500 to your concrete while mixing. Be sure to mix the concrete an additional 5-10 minutes so that AMX 5500 is thoroughly distributed throughout the concrete mix.
AVAILABILITY
5 Gallon Pails
*Other sizes available on request
APPLICATIONS
Sewer/Sanitary
RCP
Box Culverts
Manholes
Any Concrete Structure

CONCRETE